wholesale bm1 series hydraulic motor are divided into two representative structural forms: axial piston pumps and radial piston pumps. Due to the radial column

The plunger pump is a new type of high-efficiency pump with relatively high technological content. With the continuous acceleration of domestic production, the radial plunger pump is bound to

It will become an important component of the application field of plunger pumps; A radial piston pump is one in which the reciprocating motion direction of the piston or plunger is perpendicular to the driving shaft

Straight plunger pump. The working principle of the radial piston pump: The driving torque is transmitted from the driving shaft to the star-shaped hydraulic cylinder body through a cross coupling

The rotor and stator are not subject to any other lateral forces. The rotor is installed on the distribution shaft. The radially arranged plungers located in the rotor pass through static

The pressure-balanced sliding shoe is tightly attached to the eccentric travel stator. The plunger is connected to the hinge of the sliding shoe ball and locked by the retaining spring. The two holding rings will slide

The boot is stuck on the travel stator. When the pump rotates, it relies on centrifugal force and hydraulic pressure to press against the fixed inner surface. When the rotor rotates, by

Due to the predetermined eccentricity, the plunger will perform reciprocating motion, and its stroke is twice the predetermined eccentricity. The eccentricity of the stator can be determined by the pump body

The two plungers with opposite radial positions on it are adjusted. The oil enters and exits through the flow channels on the pump body and the distribution shaft, and is transported by the distribution shaft

The oil suction port control ensures that the liquid pressure generated inside the pump body is absorbed by the hydrostatic balanced surface. The static pressure balance of the friction pair was overbalanced

The pressure compensation method has formed open-loop control. The bearings supporting the drive shaft only serve a supporting function and are not subject to any other external forces. liquid

In the pressure system: The axial piston pump operates by utilizing the volume changes generated by the reciprocating motion of the plungers parallel to the drive shaft within the plunger holes

Working. Because both the plunger and the plunger hole of the plunger pump are circular parts, a very high precision fit can be achieved during processing.

wholesale bm1 series hydraulic motor https://www.aj-motor.com/BM1-series-hydraulic-motor.html